Rinnai® Tankless Water Heater, 7.5 gpm, 10300 to 180000 Btu/hr, 76 W, 0.26 to 6.5 gpm, 0.4 gpm Minimum Activation, 0.82 Energy Factor, 8 A Maximum with Pump, 4 A Maximum without Pump, 10 A Fuse, 120 VAC Appliance, 12 VDC Controller, 60 Hz, 3/4 in MNPT Gas Supply, 3/4 in MNPT Cold Water Inlet/Hot Water Outlet, 20 to 150 psi Water Supply, 4 to 10.5 in-WC Gas Supply, Gas Manifold: 3.8 in-WC at High Fire, 0.87 in-WC Low Fire, Natural Gas, Direct Electronic Ignition, 98 to 120 deg F, 14.04 in W x 23 in H x 9.3 in D
| Amperage Rating | : | 8 A Maximum with Pump, 4 A Maximum without Pump, 10 A Fuse |
| BTU Rating | : | 10300 to 180000 Btu/hr |
| Capacity | : | 7.5 gpm |
| Connection Type | : | 3/4 in MNPT Gas Supply, 3/4 in MNPT Cold Water Inlet/Hot Water Outlet |
| Dimensions | : | 14.04 in W x 23 in H x 9.3 in D |
| Energy Factor | : | 0.82 |
| Flow Rate | : | 0.26 to 6.5 gpm, 0.4 gpm Minimum Activation |
| Frequency Rating | : | 60 Hz |
| Fuel Type | : | Natural Gas |
| Ignition System | : | Direct Electronic |
| Power Rating | : | 76 W |
| Temperature Rating | : | 98 to 120 deg F |
| Voltage Rating | : | 120 VAC Appliance, 12 VDC Controller |
- Temperature controlled, continuous flow, gas hot water system
- Water flow sensor, electronic water control device and fixed by-pass
- Rinnai Circ-Logic - recirculation program cycles external pump
- Water temperature control - simulation feed forward and feedback
- Controller cable - non-polarized 2-core cable, minimum 22 AWG wire
- Safety devices: flame failure - flame rod, boiling protection, combustion fan rpm check, over current - glass fuse, remaining flame (OHS), thermal fuse, automatic frost protection
- For use with manufactured (mobile) homes
Instruction/Installation Manual