Sioux Chief 660-HB piston-type water hammer arresters shall be installed where required on washing machine valves. Water hammer arresters shall be specifically sized and have sufficient volume of air to dissipate the calculated kinetic energy generated by closing residential washing machine valves. Arresters shall be installed on both hot and cold supply inlets of washing machine valves. Arresters shall be approved for installation with no access panel required.
Sioux Chief MiniRester Water Hammer Arrestor, 3/4 in, Female Swivel Hose Thread x Male Hose Thread Tee, 250 psig Working, 1500 psig Burst, 304 Stainless Steel/Brass, 250 deg F, 5 in H
| Connection Size | : | 3/4 in |
| Connection Type | : | Female Swivel x MHT |
| Dimensions | : | 5 in H |
| Domestic/Import | : | Domestic |
| Material | : | 304 Stainless Steel/Brass |
| Pressure Rating | : | 250 psig |
| Series | : | 660 Series |
| Temperature Rating | : | 250 deg F |
- All MiniResters are approved for sealed wall installations with no access panel required
- MiniResters may be installed at any angle
- Full-slip tee sweats install in-line on 1/2 in CTS near the problem valve or fixture
- Hose tee arresters install on washing machine supply valves or directly to washing machine
- Polypropylene with two EPDM O-rings piston
Catalog