ET-HP is a two-component epoxy which can be used as a paste-over to seal cracks and secure injection ports at the surface of concrete substrates prior to implementing an epoxy or urethane foam injection repair. When properly mixed, the product will be a uniform gray color. ET-HP is rigid when cured. When the crack repair is complete, the paste-over may be left in place or ground or chiseled off the concrete substrate.
Simpson Strong-Tie® Epoxy Adhesive, 22 oz Net Content, Composition: 40 to 60% Bisphenol-A Epoxy Resin, 20 to 30% Phenol, Polymer with Formaldehyde, Glycidyl Ether, 10 to 20% Butyl Glycidyl Ether, <0.1 Titanium Dioxide(Resin), 5 to 15% 2-Piperazin-1-ylethylamine, 1 to 10% Bisphenol-A, 1 to 5% Phenol, 1 to 5% Noryl Phenol, 1 to 5% 2,4,6-tris-(dimethylaminomethyl)Phenol, 1 to 5% Benzene-1,3 Dimethaneamine, 1 to 5% Crystalline Silica, Quartz, 1 to 5% Benzldimethylamine, <1% p-tert-butylphenol(Hardener), Liquid, Paste Form, Black/White, Ammonia, Sweet Odor/Scent, 24 hr Curing Time, 1:1 Mixing Ratio, 6.9, 10.2 pH pH, 1.19, 1.36 Specific Gravity, 3 g/L VOC, 2 years Shelf Life, 150 deg F, Additional Information: 225 deg F Flash Point Hardener, 250 deg F Resin, >500 deg F Boiling Point Resin
| Additional Information | : | 225 deg F Flash Point Hardener, 250 deg F Resin, >500 deg F Boiling Point Resin |
| Color | : | Black/White |
| Composition | : | 40 to 60% Bisphenol-A Epoxy Resin, 20 to 30% Phenol, Polymer with Formaldehyde, Glycidyl Ether, 10 to 20% Butyl Glycidyl Ether, <0.1 Titanium Dioxide(Resin), 5 to 15% 2-Piperazin-1-ylethylamine, 1 to 10% Bisphenol-A, 1 to 5% Phenol, 1 to 5% Noryl Phenol, 1 to 5% 2,4,6-tris-(dimethylaminomethyl)Phenol, 1 to 5% Benzene-1,3 Dimethaneamine, 1 to 5% Crystalline Silica, Quartz, 1 to 5% Benzldimethylamine, <1% p-tert-butylphenol(Hardener) |
| Curing Time | : | 24 hr |
| Form | : | Liquid, Paste |
| Mixing Ratio | : | 1:1 |
| Net Content | : | 22 oz |
| Odor/Scent | : | Ammonia, Sweet |
| Shelf Life | : | 2 years |
| Specific Gravity | : | 1.19, 1.36 |
| Temperature Rating | : | 150 deg F |
| VOC Content | : | 3 g/L |
| pH Range | : | 6.9, 10.2 pH |
- ET-HP is a two-component, high-solids, epoxy-based system for use as a non-shrink anchor-grouting material
- ET-HP is formulated for anchoring threaded rod and rebar into concrete (cracked and uncracked) and masonry (uncracked)
- Jobsite versatility can be specified for dry and damp conditions when in-service temperatures range from -40 to 150 deg F
- Permissible for use with metric threaded rod and rebar
- Multiple state and DOT approvals
- Easy hole-cleaning no power brushing required
Catalog