The Series HF in-line flow monitors are ruggedly constructed and ideal for direct measurement for a range of compatible gases, oil or water-based liquids. This Series is designed based on a floating orifice disk and variable area flow measurement. Flowing media forces linear motion of the orifice disk and a ring shaped magnet which ride on a tapered center shaft. The transfer magnet drives a clearly visible magnet follower located outside the flow tube and a ring on the magnet follower indicates flow rate on the direct reading scale.
Dwyer® In-Line Flow Monitor, Series: HFB Series, 10 to 100 gpm Flow Rate, 3500 psig, 1-1/2 in Connection, End Type: FNPT, Accuracy: +/-2.5 %, Brass/Buna-N/PTFE/Stainless Steel Wetted, 240 deg F Maximum, Brass Body, 2-3/8 in W, 7-1/8 in H, 240 deg F
| Accuracy | : | +/-2.5 % |
| Body Material | : | Brass |
| Connection Size | : | 1-1/2 in |
| End Type | : | FNPT |
| Flow Rate | : | 10 to 100 gpm |
| Height | : | 7-1/8 in |
| Maximum Temperature | : | 240 deg F |
| Pressure Rating | : | 3500 psig |
| Series | : | HFB Series |
| Temperature Rating | : | 240 deg F |
| Wetted Material | : | Brass/Buna-N/PTFE/Stainless Steel |
| Width | : | 2-3/8 in |
- This unique design allows accurate performance with fluid viscosities up to 500 SSU
- All internal wetted parts are contained inside a sealed metal tubular casing assuring a virtually maintenance-free unit
- Increased application versatility with no inlet or outlet straight plumbing requirement and can be mounted horizontally, vertically or inverted
- Rugged construction allows for high-pressure and temperature rating for long operation life
- Setting pressure relief valves, fluid handling equipment, detecting low-flow rates for lubricating liquids, pulp and paper, industrial maintenance, fluid power, heating loop flow
Instruction/Installation Manual