The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel and aluminum. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece and they have a straight shank that installs into a drill chuck or similar tool holder.
Grainger® Jobber Length Drill Bit, Drill Size - Wire: #42, Drill Size - Decimal Inch: 0.0935 in, 2 in L Overall, Number of Flutes: 2, Straight Shank, 5/64 in Dia Shank, 1 in L Shank, Spiral Flute, 1 in L Flute, Split Point, Point Angle: 118 deg, Helix Angle: 25 deg, Cutting Direction: Right Hand, Drill Diameter Tolerance: 0.0005 in, Carbide, Tin, Coolant/Non-Coolant Through: Coolant-Through, Web Thinning/Non-Web Thinning: Web Thinning, Additional Information: Individual Drill Bit Grouping, Split Web Construction
| Additional Information | : | Individual Drill Bit Grouping, Split Web Construction |
| Coolant/Non-Coolant Through | : | Coolant-Through |
| Cutting Direction | : | Right Hand |
| Drill Diameter Tolerance | : | 0.0005 in |
| Drill Size - Decimal Inch | : | 0.0935 in |
| Drill Size - Wire | : | #42 |
| Finish | : | Tin |
| Flute Length | : | 1 in |
| Flute Type | : | Spiral |
| Helix Angle | : | 25 deg |
| Material | : | Carbide |
| Number of Flutes | : | 2 |
| Overall Length | : | 2 in |
| Point Angle | : | 118 deg |
| Point Type | : | Split |
| Shank Diameter | : | 5/64 in |
| Shank Length | : | 1 in |
| Shank Type | : | Straight |
| Web Thinning/Non-Web Thinning | : | Web Thinning |