Rheem® Electric Water Heater, 85 gal Capacity, 61420 Btu/hr, 18 kW Power, 98 % Efficiency, Number of Elements: 3, Element Wattage: 6000 W, 480 V, 1 ph, 3 ph, Connection Type: NPT, 1-1/2 in Connection, 150 psi, Class G Fuse, Surface Mounting, Steel, 181 deg F, 57-11/16 in H x 28-1/4 in Dia, Prewired Wiring, Additional Information: Heavy-Duty
| Additional Information | : | Heavy-Duty |
| BTU Rating | : | 61420 Btu/hr |
| Capacity | : | 85 gal |
| Connection Size | : | 1-1/2 in |
| Connection Type | : | NPT |
| Dimensions | : | 28-1/4 in Dia x 57-11/16 in H x 34 in D |
| Efficiency | : | 98 % |
| Element Material | : | Stainless Steel |
| Element Type | : | Screw-In |
| Element Wattage | : | 6000 W |
| Fuse Type | : | Class G |
| Material | : | Steel |
| Mounting Type | : | Surface |
| Number of Elements | : | 3 |
| Phase | : | 1 ph, 3 ph |
| Power Rating | : | 18 kW |
| Pressure Rating | : | 150 psi |
| Temperature Rating | : | 181 deg F |
| Voltage Rating | : | 480 V |
| Wiring Type | : | Pre-Wired |
- Elements are Lifeguard™ stainless steel, screw in type that resist burn out and corrosion
- Long-life tank design - proprietary steel formulation with high temperature glass lining to maximize corrosion resistance resulting in a superior tank design
- Two anode rods are installed to ensure long-life and corrosion resistance
- Thick foam insulation for minimal standby heat loss
- Control box is located at the front of unit for easy wiring during installation multiple knockout holes accommodate a variety of conduit sizes
- System Sentinal™ provides a diagnostic panel with LEDs that correspond to the number, location and status of each element
- Full port, full flow, brass drain valve for faster draining
- Minimum distance to combustible is zero inches from jacket and 18 in from access door
- All models approved for installation on combustible flooring
Instruction/Installation Manual