AQUA BATH's transfer roll-in shower stall is molded from a single sheet of Lucite® cast acrylic without any joints or seams. The advantages of this one-piece construction is greater rigidity, lessens pre-installation damage, cuts costly maintenance and best of all, there are no places for mold to grow. The enclosure inside dimensions are 60 in W x 36 in D. The 3/4 in threshold unit allows for a top of slab application. However, the finished floor detail must comply with ADA compliance and must be flush with the top of the threshold to give a complete barrier-free entrance and exit of the wheelchair from the shower enclosure. The approximate weight of the unit is 275 lb.
AQUA BATH Transfer Roll-In Shower Stall, Care Series, 82-3/4 in L Overall, 65 in W Overall, 37 in H Overall, Plastic
| Material | : | Plastic |
| Overall Height | : | 37 in |
| Overall Length | : | 82-3/4 in |
| Overall Width | : | 65 in |
| Series | : | Care Series |
- Hidden flange rod
- Convertible/removable fold-up seat
- Fold-up seat (adds 3/4 in to outside width)
- Handheld shower set
- 24 in grab/slide bar
- Pressure balance control valve
- Anti-bacterial shower curtain with hooks
- Brass drain
- Factory drilled for dome light (for use on dome model)
- Removable threshold
- Water retention strip
- Modify to 30 in inside dimension depth and remain ADA compliant
- Modify to 48 in inside dimension depth and remain ADA compliant (48 in D model is only available as 2 in threshold)
Instruction/Installation Manual