Furnish and install mop base as manufactured by FLORESTONE. Shoulder shall be not less than 8 in high inside and not less than 1 in wide. Drain body shall be brass, cast integral and shall provide for a non-caulked connection (lead caulked optional) not less than one inch deep to a two or three inch pipe (specify 2 in or 3 in). Mop sinks with 3 in drains are supplied with a rubber seal for use on ABS, PVC or steel pipe. Base shall be manufactured of tan and white marble chips cast in white Portland cement to produce a compressive strength of not less than 3000 psi, 7 days after casting. Terrazzo surface shall be ground and polished with all air holes and/or pits to be grouted and excess removed and sealed to resist stains and moisture. Base will be reinforced with 16 ga wire. Stainless steel grid standard.
FLORESTONE Mop Base, Series: 5 Series, Collection: Terrazzo, 3 in Drain, 16 ga, Cement/Marble, 24 in L, 24 in W, 10 in H
| Collection | : | Terrazzo |
| Drain Size | : | 3 in |
| Gauge | : | 16 ga |
| Height | : | 10 in |
| Length | : | 24 in |
| Material | : | Cement/Marble |
| Series | : | 5 Series |
| Width | : | 24 in |
Instruction/Installation Manual