Our PF Series 4 in submersible effluent pumps are designed to transport screened effluent (with low TSS counts) from septic tanks or dosing tanks. These pumps are constructed of lightweight, corrosion-resistant stainless steel and engineered plastics and are field serviceable and repairable with common tools. They're also CSA and UL certified to US and Canadian safety standards for effluent pumps. PF Series pumps are used in a variety of applications, including pressurized drain fields, packed-bed filters, mounds, aerobic units, effluent irrigation, liquid-only (effluent) sewers, wetlands, lagoons and more. These pumps are designed to be used with a Biotube® pump vault or after a secondary treatment system.
Orenco® SYSTEMS Submersible Effluent Pump, PF Series, 115 VAC, 12.1 A, 60 Hz, 0.5 hp, 50 gpm Flow Rate, 1 ph, 2 in Discharge, Acetal Impeller, Polypropylene, 20.3 in L, Additional Information: 24 in Minimum Liquid Level, 300 Rated cycles/Day
| Additional Information | : | 24 in Minimum Liquid Level, 300 Rated cycles/Day |
| Amperage Rating | : | 12.1 A |
| Dimensions | : | 20.3 in L |
| Discharge Size | : | 2 in |
| Flow Rate | : | 50 gpm |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 0.5 hp |
| Impeller Material | : | Acetal |
| Material | : | Polypropylene |
| Phase | : | 1 ph |
| Series | : | PF Series |
| Voltage Rating | : | 115 VAC |
- Minimum 24 hr run-dry capability (liquid end) with no deterioration in pump life or performance
- 1/8 in bypass orifice to ensure flow recirculation for motor cooling and to prevent air bind
- Liquid end repair kits available for better long term cost of ownership
- TRI-SEAL™ floating impeller design on 10, 20 and 30 gpm (0.6, 1.3 and 1.9 L/sec) models, floating stack design on 50 and 75 gpm (3.2 and 4.7 L/sec) models
- Franklin Electric super stainless motor, rated for continuous use and frequent cycling
Specification Sheet