Furnish and install Model 300 terrazzo base as manufactured by FLORESTONE. Shoulder will be not less than 2-1/2 in inside. Flange, cast integral, will be galvanized- bonderized steel and extend not less than 1 in above shoulder on two sides for installation. Drain body will be brass, cast integral and will provide for a non-caulked connection not less than one inch deep to a 2 in pipe. Base will be manufactured of tan and white marble chips cast in white Portland cement to produce a compressive strength of not less than 3000 psi, seven days after casting. Terrazzo surface will be ground, polished and the entire unit sealed to resist stains and moisture after any air holes and/or pits are grouted. Base will be reinforced with 16 ga wire. Removable type stainless steel strainer plate will be supplied.
FLORESTONE Corner Shower Receptor, Terrazzo Collection, 40 in Length, 40 in Width, Center Drain Location, 20 in L x 20 in W Rough-In, Cement/Marble
| Collection | : | Terrazzo |
| Drain Location | : | Center |
| Length | : | 40 in |
| Material | : | Cement/Marble |
| Rough-In Size | : | 20 in L x 20 in W |
| Width | : | 40 in |
- With 1-1/4 in flange on two sides and double threshold for corner installation
Instruction/Installation Manual