The complete tapping sleeve is constructed of 304 or 316 stainless steel (unless optional carbon steel flange fitting is ordered) and shall be passivated so as to return the welded stainless steel to its original corrosion-resistant state.
PowerSeal Tapping Sleeve, 8 x 8 x 6 in Nominal, 9.05 to 9.45 in OD, 304 Stainless Steel, Material Standard: ASTM A193, ASTM A194, ASTM A240, ASTM A743, ASTM D2000, ASTM D6778, -25 to 200 deg F, Additional Information: NBR Branch Gasket, SBR Shell Gasket
| Additional Information | : | NBR Branch Gasket, SBR Shell Gasket, 9.05 to 9.45 in OD, ASTM A193/A194/A240/A743/D2000/D6778 Material Standard |
| Fits Pipe Size | : | 8 x 8 x 6 in |
| Material Standard | : | ASTM A193, ASTM A194, ASTM A240, ASTM A743, ASTM D2000, ASTM D6778 |
| Material | : | Stainless Steel |
| Nominal Size | : | 8 x 8 x 6 in |
| Outside Diameter | : | 9.05 to 9.45 in |
| Temperature Rating | : | -25 to 200 deg F |
- Built-in range allows reduction of inventory
- Drop-in track head bolts with stainless steel nuts allow assembly in either direction
- 360 deg complete full circle mat o-ring gasket provides protection against leaks beyond o-ring seal
- The branch shall be a minimum of 3/8 in larger diameter than nominal to allow the use of a full size cutter
- Stainless steel and carbon steel outlets available
- Can be custom built for any pipe OD within limits
Instruction/Installation Manual