Sioux Chief preformed elbows are factory produced to the ASME/ANSI B16.22 standard for copper sweat fittings, in the same exact manner as common sweat elbows made by Nibco, Elkhart and Mueller. Sioux Chief elbows should be considered as the same, regardless of the length of the leg of the Sioux Chief elbows. The bend itself is no different than a common sweat 90. The wall thickness of the back side of the bend is not thinned out and meets all requirements of ASME/ANSI B16.22. The overall part is burst tested to 2900 psig, which means the bend can and does hold this much pressure.
Sioux Chief Sweat Bullet™ Lead-Free Spin Closed Stub Out Bullet, Series: 622, Bullet Fitting, 1/2 in Fitting, Copper, 8 in Length, Domestic/Import: Domestic, For Use With: Press-Fitting and Push Fittings
| Connection Type | : | CTS |
| Domestic/Import | : | Domestic |
| Fitting Size | : | 1/2 in |
| Fitting Type | : | Bullet |
| Length | : | 8 in |
| Material | : | Copper |
| Series | : | 622 Series |
| Suitable For Use With | : | Press-Fitting and Push Fittings |
- Stub out and air chamber - turn your variable jobsite costs into fixed job costs
- Stub out and air chamber - reduce jobsite and shop costs such as measuring, cutting, cleaning, fluxing, assembling and soldering
- Stub out and air chamber - 1-1/4 to 2 in cts bullets available for quote
- Stub out and air chamber - accepts sweat, push fitting and compression valves
- Polished nickel-plated eliminates the need for sleeving or tinning
- Polished nickel-plated solders with standard flux and solder
- Bracketed stub out - perfect for stubbing up through the floor for closets or lavs
- Bracketed stub out - square o strap is crimped to tube 12 ft from each end
Instruction/Installation Manual