Chicago Fittings X-Riser Flexible Anodeless Riser, 1 in, IPS x MPT, 0.119 in Wall Thickness, Yellow Zinc Dichromate, 36 in L
| Connection Size | : | 1 in |
| Connection Type | : | IPS x MPT |
| Dimensions | : | 36 in L |
| Finish | : | Yellow Zinc Dichromate |
| Length | : | 36 in |
| Wall Thickness | : | 0.119 in |
- No underground joints-one solid service line from point-to-point with above ground terminations
- No chamfering-a simple clean cut is all that is required
- Bi-directional seal assembly can't be installed improperly where some competitors multiple internal components must have proper order and orientation to function properly
- No torque requirements-all x-risers incorporate the "bottoming" or "positive stop" design, simply tighten the compression nut until it is metal-to-metal and you are done
- Simple design can be installed with one flat jaw wrench extending the life of protective coatings commonly flawed or removed by pipe wrenches
- Integral barbed stiffeners are permanent (not loose) For additional pull-out resistance
Catalog