Sioux Chief 508 Series copper-plated bell hangers shall be used where necessary to support copper CTS in piping systems. Hanger shall be fastened directly to studs, joists or walls and secured with 2-1/2 in mounting screw (provided). Bell hanger shall minimally provide a 3/4 in stand off distance from mounting surface. Hanger shall be copper-plated. Upper and lower pipe saddles of hanger shall fit 1/2, 3/4 or 1 in CTS tube after screws are tightened. Upper pipe saddle may or may not have void in strap for easier installation.
Sioux Chief 508 Overhead Bell Hanger, For Pipe/Tube Diameter: 1/2 in, Steel, Copper, Joist, Stud, Wall Mounting Location, Screw Mounting, 3/8 in Mounting Hole, 22 ga Material Thickness, 1.64 in Overall Width, 1.43 in Overall Height
| Finish | : | Copper |
| For Pipe/Tube Diameter | : | 1/2 in |
| Material Thickness | : | 22 ga |
| Material | : | Steel |
| Mounting Hole Size | : | 3/8 in |
| Mounting Location | : | Joist, Stud, Wall |
| Mounting Type | : | Screw |
| Overall Height | : | 1.43 in |
| Overall Width | : | 1.64 in |
- 13/16 in stand-off
- Recessed hole for mounting screw
Specification Sheet