Shielded transition couplings connect thin wall plastic pipe to plastic, steel or extra heavy cast iron pipe. For non-pressure, gravity flow applications only. Recommended for above ground installations. Easy-to-install and reuse.
Mission™ BAND-SEAL® Coupling, Series: TWP, 4 x 3 in Fitting, Thinwall Plastic x Plastic/Steel/Extra Heavy Cast Iron Connection, 1500 psi Tensile Strength, 250 % Elongation, 60 in-lb Torque, ASTM C1460, ASTM A240/A240M, ASTM C564 Material Standard, Stainless Steel/Synthetic Rubber, 2.12 in W x 3.5 in OD, Domestic/Import: Domestic
| Connection Type | : | Thin Wall Plastic x Plastic/Steel/Extra Heavy Cast Iron |
| Dimensions | : | 3.5 in OD x 2.12 in W |
| Domestic/Import | : | Domestic |
| Elongation | : | 250 % |
| Fitting Size | : | 4 x 3 in |
| Material Standard | : | ASTM C1460, A240, A240M, C564 |
| Material | : | Stainless Steel/Synthetic Rubber |
| Series | : | TWP Series |
| Tensile Strength | : | 1500 psi |
| Torque Rating | : | 60 in-lb |
- MissionMade™ products are easy-to-install and reuse
- Synthetic rubbers permit considerable distortion withstanding tension and compression
- Internal pipe stop for proper pipe positioning and noise/vibration reduction
- Sealing O-rings under each clamp prevent pipe end slippage for a reinforced joint seal
- Stainless steel components resist corrosion in various environments
- Independent clamp tightening adapts to different outside pipe diameters
- Increased band tension secures pipe ends, for a watertight seal, axially tapered design distributes and dissipates internal stresses
- Thick, stainless steel shield controls load bearing between coupling and pipe surface, opposing shear forces while maintaining pipe alignment
- 301 Series stainless steel worm drive clamp
- 300 Series stainless steel shield
- Molded, one-piece, elastomeric sealing gasket
Instruction/Installation Manual