The Flare Male Reducing Adapter is highly dependable and an economical choice of fitting for fluid and air transmission within multiple application including heating and other industrial markets. This all brass fitting features a vibration resistant construction. It resists mechanical pullout and is designed for high pressure service.
BrassCraft® Adapter, Series: 48 Series, Adapter Fitting, 1/2 in Connection Size 1, Flared Connection Type 1, 1/2 in Connection Size 2, MIP Connection Type 2, 1/2 in Connection Size 3, 1/2 in Connection Size 4, Flared|MIP Connection, Brass, Brass Material Construction, 1/2 in Tube OD, 1.44 in L Dimensions, 600 to 3000 psi Pressure, -65 to 250 deg F
| Connection Size 1 | : | 1/2 in |
| Connection Size 2 | : | 1/2 in |
| Connection Size 3 | : | 1/2 in |
| Connection Size 4 | : | 1/2 in |
| Connection Type 1 | : | Flared |
| Connection Type 2 | : | MIP |
| Connection Type | : | Flared|MIP |
| Dimensions | : | 1.44 in L |
| Fitting Type | : | Adapter |
| Material Construction | : | Brass |
| Material | : | Brass |
| Pressure Rating | : | 600 to 3000 psi |
| Series | : | 48 Series |
| Temperature Rating | : | -65 to 250 deg F |
| Tube OD | : | 1/2 in |
- Flare fitting resists mechanical pull out
- Recommended for higher pressures than those covered by compression fittings
- Rough Brass
- Designed for use with aluminum, copper, brass and welded steel tubing that can be flared
- Designed for use with fuel, oil, liquefied petroleum (LP) and natural gas lines
Specification Sheet