Mission's Band-Seal® end cap is a exible rubber end cap designed for capping cast iron, steel or plastic pipe ends. End Cap consists of one 301 Series stainless steel worm drive clamp, over a molded one-piece elastomeric sealing cap.
Mission™ Flexible End Cap, Fitting Type: End Cap, 5 in Fitting, Connection Type: Cast Iron/Plastic/Steel, Rubber, Domestic
| Connection Type | : | Cast Iron/Plastic/Steel |
| Domestic/Import | : | Domestic |
| Fitting Size | : | 5 in |
| Fitting Type | : | End Cap |
| Material | : | Rubber |
- Leak-proof increased band tension secures pipe end, forming a watertight seal, strong, molded "ASTERISK" braces end cap against head pressure during testing
- Stainless steel components resist corrosion in a variety of environments
- Secure Tight fitting internal cone creates wedge inside pipe, balancing outward strains against steel clamp, sealing O-rings under clamp prevent pipe end slippage for a reinforced joint seal
- Durable - molded, synthetic rubber cap resists UV rays, ozone, fungus growth, natural soil erosive properties and normal sewer gases, so strong it doesn't need the usual reinforcing plastic disk or liner
- Perfect protection against entry of dirt into pipe
- Resilient synthetic rubbers permit considerable distortion withstanding tension and compression, more pliable and easier to install in cold weather applications than an elastomeric PVC cap
- Reusable so easy to install and reuse that it makes an ideal permanent clean-out
- Adaptable - for permanent or temporary clean outs, independent clamp tightening adapts to different outside pipe diameters
- Listed by IAPMO for "permanent clean out" applications
- Pre-set calibration all Band-Seal® end caps are designed to be installed with a pre-set torque wrench calibrated to 60 in/lb maximum to accommodate the 300 Series stainless steel 5⁄16 in hex head screw
Specification Sheet