Mission™ MR51 44 ARC
Mission™ MR51 ARC Series MR51 44 ARC Shielded Adjustable Sewer Repair Coupling, 4 in, Stainless Steel/Synthetic Rubber
- Manufacturer: Mission Rubber Company
- Brand Name: Mission™
- Part#: 1510512
- MPN: MR51 44 ARC
- UPC: 016846145249
- Min. Order Qty: 1
- Qty. Interval: 1
-
Availability:
-
Price:
Shielded, high-performance sewer repair couplings connect concrete pipe to cast iron or SCH 40 plastic pipe. For non-pressure, gravity flow applications only. Recommended for underground installations, although some jurisdictions will allow use above ground. Easy to install and reuse.
Mission™ Shielded Adjustable Sewer Repair Coupling, Series: MR51 ARC Series, 4 in Fitting, Concrete x Cast Iron/SCH 40 Plastic Connection, ASTM A240/A240M-06/C1173-06/C425-04 Material Standard, Stainless Steel/Synthetic Rubber, 4.5 in ID x 4.93 in OD x 4 in W, Domestic/Import: Domestic, 5/16 in Bolt Size, 1/4-20 UNC-2A Thread Size
| Additional Information | : | 5/16 in Bolt Size, 1/4-20 UNC-2A Thread Size |
| Connection Type | : | Concrete x Cast Iron/Plastic |
| Dimensions | : | 4.5 in ID x 4.93 in OD x 4 in W |
| Domestic/Import | : | Domestic |
| Elongation | : | 250 % |
| Fitting Size | : | 4 in |
| Material Standard | : | ASTM A240, A240M-06, C425-04, C1173-06 |
| Material | : | Stainless Steel |
| Series | : | MR51 ARC Series |
| Temperature Rating | : | 158 deg F |
| Tensile Strength | : | 1000 psi |
| Torque Rating | : | 60 in-lb |
- Increased band tension secures pipe ends, for a watertight, root-proof seal, impervious to infiltration and exfiltration
- Missionmade™ products are easy to install and reuse
- Synthetic rubbers permit considerable distortion withstanding tension and compression, more pliable, easier to install in cold weather applications than elastomeric PVC gaskets
- Synthetic rubber gasket resists ultraviolet rays, ozone, fungus growth, natural soil erosive properties and normal sewer gases
- Sealing O-rings under each clamp prevent pipe end slippage for a reinforced joint seal
- Certified Cradle to Cradle™, manufactured within a five-point continual improvement process - material health, material reutilization, renewable energy and carbon management, water stewardship and social fairness
- Stainless steel components resist corrosion in marine applications, poorly aerated/moist soils, contaminated grounds conditions and chloride, sulfates or bicarbonates in ground water
- Independent clamp tightening adapts to different outside pipe diameters
- Thick, stainless steel shield controls load bearing between coupling and pipe surface, opposing shear forces while maintaining pipe alignment
- Surgical-grade 316 stainless steel, nut and bolt clamps
- 301 Series stainless steel with 301 Series stainless steel, worm drive clamps shield
- Molded, one-piece, elastomeric sealing gasket
Instruction/Installation Manual