Cherne original end-of-pipe gripper mechanical plugs can be used in applications including DWV (drain, waste and vent) testing and stack testing. End-of-pipe design seals only at the end of a pipe. Cherne's Gripper plugs can be used in a variety of applications including DWV (drain, waste and vent) testing and stack testing. End-of-Pipe design won't fall in, whereas the inside-of-pipe design allows you to locate the plug inside the pipe as far as you need. Time tested, the Gripper remains one of the most popular mechanical plugs on the market.
CHERNE® Gripper Mechanical Plug, Plug Fitting, 6 in Fitting, 17 psi, Glass Reinforced ABS Plastic, 3-3/4 in L
| Fitting Type | : | Plug |
- Plug is rated for 17 psi or 40 ft of head pressure
- Extra large zinc wing nut for ease of tightening, no wrench required
- Natural rubber o-ring for excellent expansion and memory
- ABS glass-reinforced plates for added strength
- Zinc-plated carriage bolt resists rust and corrosion
- End-of-pipe design seals only at the end of a pipe
- Inside-of-pipe design seals inside pipe as far as needed
- 5.77 - 6.08 in usage range
Specification Sheet